Sunshine Coast QLD / since 1989
Custom paint colour matching in Currimundi
Spectrophotometer colour matching and mixing for Currimundi vehicle owners, panel shops and spray painters
- Open
- Mon-Fri 7:30am to 4pm
- Counter
- 5 Main Drive, Warana
- Since
- 1989

Local since 1989
Same Kawana site for over 35 years
Overview
Why colour-matching works differently in Currimundi
If a panel on your Currimundi vehicle no longer matches its factory colour, Queensland Paint Supplies reads the panel itself with a spectrophotometer rather than trusting the paint code alone, including fading and weathering. That gap tends to be wider here: Currimundi is overwhelmingly a separate-house suburb running close to two vehicles per household, and a car kept in one driveway for years has usually drifted further from its original code than a newer daily-driver. Panel shops, spray painters, restorers and DIY owners can expect a straightforward solid colour mixed the same day, while metallics, pearls and three-stage reds need extra time and more than one pass. There's no counter in Currimundi; Warana is nearest, with van delivery available, so bring the panel in before you book.

For Currimundi, the practical question is what actually happens when your car's colour needs matching, and why some colours take minutes while others take days to get right. The answer depends above all on the paint itself: specifically, whether it's a solid colour or one with metallic, mica or pearlescent flake in it.
A paint code tells you what colour a panel was meant to be when it left the factory; it doesn't tell you what colour that panel actually is now, after years of Sunshine Coast sun, salt air and weathering. That gap tends to run wider in Currimundi than in suburbs with more vehicle turnover: 81.8% of the suburb's 2,534 occupied dwellings are separate houses, and the average household runs close to two vehicles (1.8 per dwelling), a profile that points to cars kept long-term in their own driveway or garage, not cycled through a short lease. Queensland Paint Supplies' colour-matching process starts from the panel itself: a spectrophotometer reads the current colour directly, the reading is compared against a formula, and a test card is sprayed and adjusted until the card and the vehicle agree in daylight. That matters most for Currimundi owners doing a one-panel touch-up, where a slightly-off colour sits next to original, faded paint and is immediately obvious.
How long that process takes depends on what's being matched, and this isn't just a Queensland Paint Supplies caveat; it's a known limitation of the technology itself. Independent trade-press coverage confirms that solid colours typically match well on the first attempt, while metallic, mica and pearlescent finishes are a harder case needing more adjustment, because the reflective flake scatters light differently depending on viewing angle. That distinction counts for more on an older driveway-kept panel like the kind common here, where fade pushes a once-easy solid colour closer to a harder call. Queensland Paint Supplies builds that difference into how it schedules work: most orders, especially simple solid colours, are mixed the same day, but complex matches (metallics, pearls, three-stage reds, aged or faded panels) are flagged at order time and given the extra time they need.
For the harder calls, staff experience comes into play alongside the spectrophotometer reading. Gavin Pollock, who runs van sales and has close to 35 years in the refinish trade across both automotive and industrial coatings, is one of several staff with decades of combined experience who weigh in on difficult substrates, discontinued colours and tricky finishes. That matters for Currimundi customers working on an older or restoration vehicle that's sat in the same driveway for years, where the original colour may no longer be a simple database lookup.
The same counter serves two different kinds of Currimundi customer without treating either as an afterthought: panel shops and spray painters running trade accounts for volume work, and DIY or hobbyist owners who just need one aerosol can or touch-up bottle for a stone chip or scratch, filled from the same tinted base used for full spray-gun mixes.
Common problems
Common colour-matching problems in Currimundi
- 01
A touched-up panel looks slightly off next to the surrounding original paint

- Why it happens
- A printed paint code describes the colour as it was when the panel was new, not as it looks now after years of sun and weathering.
- Why it matters
- A mismatched patch on one panel is immediately visible next to original paint and undermines an otherwise good repair.
What we do
The panel itself is read with a spectrophotometer and the mix is adjusted against a sprayout card until it agrees with the vehicle in daylight.
- 02
A metallic, pearl or three-stage colour takes longer to match than a customer expects

- Why it happens
- Reflective flake in metallic, mica and pearlescent finishes scatters light unevenly, which is a known limitation of spectrophotometer matching industry-wide, not specific to one supplier.
- Why it matters
- A customer who assumes every colour is a same-day job can be caught out if their vehicle has one of the harder finishes.
What we do
Complex finishes are flagged at order time and given the extra time and adjustment passes they need, rather than being rushed out same day.
- 03
Only a small amount of paint is needed for a stone chip or scratch, not a full spray-gun order

- Why it happens
- Most colour-matching services are set up around panel-sized or full-respray quantities.
- Why it matters
- A DIY or hobbyist owner doing one small repair doesn't want to pay for, or store, far more paint than the job needs.
What we do
Custom-mixed aerosol cans and brush-applicator touch-up bottles are filled from the same tinted base used for full mixes, sized to the job.
- 04
An older, discontinued or unusual colour isn't a simple database lookup

- Why it happens
- Ageing panels, prior repairs or discontinued factory colours can sit outside a straightforward code-to-formula match.
- Why it matters
- Restorers and owners of older vehicles risk a poor match if the job is treated as routine when it isn't.
What we do
Staff with decades of combined refinish experience, including Gavin's close to 35 years across automotive and industrial coatings, review difficult substrates and colours alongside the spectrophotometer reading.
- 05
A panel shop running several jobs a week and a one-off hobbyist have very different needs from the same counter

- Why it happens
- Trade volume work and single retail repairs call for different ordering, pricing and turnaround arrangements.
- Why it matters
- A service built only around one type of customer leaves the other poorly served.
What we do
Trade accounts are available for panel shops, spray painters and industrial clients, alongside retail-scale aerosol and touch-up products for individual vehicle owners.
Range
Colour-matching & mixing services for Currimundi

Spectrophotometer Colour Matching
With most Currimundi homes being separate houses running close to two vehicles per dwelling, cars often sit in the same driveway for years, so a panel's actual colour has usually drifted further from the compliance-plate code than a newer vehicle's, and that is exactly what the spectrophotometer reads.
Aerosol & Touch-Up Bottles
A stone chip or small scratch from a Currimundi driveway repair doesn't need a full spray-gun order; a matched aerosol can or touch-up bottle is filled from the same tinted base.
Trade & Panel Shop Accounts
Panel shops and spray painters working Currimundi jobs can run a trade account alongside the same counter that serves individual vehicle owners.
Stocked, matched, and backed by experience
Why panel shops and DIYers buy here
Staff at Queensland Paint Supplies bring decades of combined refinish experience to the counter, including Gavin's close to 35 years across automotive and industrial coatings. The colour-matching process itself (reading the panel with a spectrophotometer rather than relying on a printed paint code, then adjusting against a sprayout card until it matches in daylight) is the same method used industry-wide, and the harder cases it flags, metallics, pearls and three-stage reds, are a recognised limitation of the technology, not a guess specific to this business. The counter serves panel shops, spray painters and industrial clients on trade accounts, as well as DIY and restoration customers buying a single touch-up bottle or aerosol can. There's no Queensland Paint Supplies branch in Currimundi; Warana is the nearest counter, with van delivery also available.
Local since 1989
Same Kawana site for over 35 years
Concept Paints distributor
Including the NO MIX system
Cromax and BESA refinish
Cromax and Bernardo Ecenarro
Custom colour matching
Spectrophotometer on site and in the van
Getting here
Directions from Currimundi to our Warana store
Our workshop is at 5 Main Drive, Warana, in the Warana industrial area, on the corner of Main Drive and Commerce Avenue. From Currimundi, near the Currimundi Lake mouth, it's about ten minutes south on Nicklin Way to reach us. We keep the van stocked for the common jobs, so most Currimundi call-outs are sorted in a single visit. If it's easier to drop in, give us a call first.
Queensland Paint Supplies5 Main Drive, Warana QLD 4575, Australia
07 5493 2088
Monday to Friday, 7:30am to 4pmDirections from Currimundi
Coverage: Currimundi, by van or from the Warana counter
Questions
Asked at the counter
Can you match my car's paint colour exactly if I'm in Currimundi?
Yes. The panel is read with a spectrophotometer rather than relying on the paint code alone, then adjusted against a sprayout card until it matches in daylight. There's no Queensland Paint Supplies counter in Currimundi itself, so you'd bring the panel to the Warana counter or arrange van delivery.
How long does a custom colour match take?
Most orders, especially simple solid colours, are mixed the same day and can be done while you wait. Metallics, pearls, three-stage reds and aged or faded panels take longer and are flagged at order time so you know what to expect.
Why do metallic and pearl colours take longer to match than solid colours?
It's a known limitation of spectrophotometer matching generally, not something specific to this business: reflective flake in metallic, mica and pearlescent finishes scatters light unevenly, so these finishes typically need more adjustment passes than a solid colour. Three-stage reds sit in the same group. Those jobs are flagged at order time, and they are worth bringing the vehicle in for rather than ordering from a code.
Do you sell small touch-up amounts, or only full cans?
Both. Custom-mixed aerosol cans and brush-applicator touch-up bottles are filled from the same tinted base as full spray-gun mixes, so a stone chip or small scratch doesn't need a full order. Bring the panel or part to the Warana counter, or arrange van delivery to Currimundi, and the small quantity is matched to the panel as it looks now.
I have an older vehicle that's been sitting in my Currimundi driveway for years. Can its colour still be matched?
Usually, yes. Currimundi is mostly separate houses running close to two vehicles per dwelling, and a car kept long-term in one driveway typically fades further from its original paint code than a newer vehicle would. The spectrophotometer reads the panel as it actually is now, not just the code, so an aged or discontinued colour can still be matched, with staff experience brought in on the harder calls.
Can a panel shop or trade account get colour-matched paint at volume?
Yes. Trade accounts are available for panel shops, spray painters and industrial clients, alongside the retail-scale aerosol and touch-up products used by individual vehicle owners. Trade work is most of the business, and Gavin Pollock runs the sales van, so a Currimundi shop can be restocked on the regular run rather than sending someone to Warana. Ask about an account when you call.
Also stocked
From the Warana counter
Custom paint for Currimundi, mixed at the Warana counter
Before you book a respray or order paint for a Currimundi job, find out which kind of match you're dealing with. Bring the panel or part to the Warana counter, or arrange van delivery, for a spectrophotometer read: a solid colour is usually sorted the same day, while a metallic, pearl or three-stage match is worth scheduling ahead.
